Advantages of Baby carriage

• Safe option for your baby
• Highly convenient
• Strollers serve multiple purposes
• High durability
• Helps in avoiding backpain for parents
• It is portable
• Easy to carry your baby accessories
• Comfortable for your baby

It shed that pregnancy weight while giving their back a much-needed respite from strain.

The final product we made was extremely better than what I expected because I thought we cannot make extremely fast speed as the video, but it is way faster than I expected, but the weakness was occurred from I didn’t expect which is batteries. The most challenge one is connecting the carriage and RC car because the carriage is extremely bigger than what I expected and the balance is not good, so it is too hard to control.

No prototype because we don’t have time to build it. We combined the carriage and the RC car that indicate RC baby carriage. The Speed is slowed down a little bit, it’s working well, but the problem is batteries. I used batteries that used 5years ago. It doesn’t go straight because the balance is not good after connecting them. Moreover, the carriage is extremely bigger than RC car, so if we have more time, we will fix these issues and make the carriage a little bit smaller. However, as getting some feedbacks from classmates, especially changing directions, we fixed it.

I draw rough drawing that includes only basic information and annotations, but through feedback from classmates, I revised the drawing to the isometric drawing. Then, I built an RC car which is not really the same as my thinking. There was not plenty of time, so I just built it as seemed like the minibike. I just observed my model that what I need to revise and how to make it easily in a short time. There are some specific feedbacks from others, especially classmates told I need to change the directions of the product because it should avoid the obstacles or obstructions that block them to not go forward. Improvements: I revised the position of the front tires. I drew specific locations of motors, batteries, and CPU. I added some specific measurements. I will make holes in the side of cardboard, and then I will put my screws and connect them together. For success criteria, we finished on time and we built the product as similar as our rough drawing.

Definition: used for infants who lack the ability to sit or to hold their head up

The relevant people or clients for this project are parents who naturally feel tired in the postpartum period because healing from childbirth, taking care of a newborn, producing breast milk, and breastfeeding every 2 to 3 hours requires much energy, but they cannot rest if it keeps repeat and repeat. Usually, most moms are caring about their newborns; however, their strengths won’t maintain their bodies, so we make this for them to control baby carriage by a control plane. In addition, a baby will feel tired because it makes motion sickness can also keep people from enjoying their ride, leaving them nauseated, tired, dizzy, and even vomiting.

I want to build this product that buttresses parents to be able to rest without any distractions and relax with doing their hobbies. Before quarter 3 ends are the significant dates because it should be finished before this subject, science. We are interested in this challenge because a myriad of parents will use this product if they have difficult and challenging times since they are nurturing their babies. I think I will use cardboard, motors, tires, robotics materials, etc. I will approach it by observing websites with their babies. The baby carriage is used for infants who lack the ability to sit or hold their heads up. This product is similar to my product because this product is also used for an RC baby carriage. However, most people using the product have tiredness and care for their babies and others.

Moreover, the video below the statement inspired Ted and me to make this product for a science project that uses electrical energy, and the outcome is kinetic, and waste is sound energy. In addition, it included evidence that it was safe. However, we didn’t what is the highest speed of school motors and it doesn’t match my materials, thus I used the motors that have the highest speed.

在春天， 汉城是最好的去处。汉城在春天很中间。汉城的春天的从三月到五月，气温从3度到26度。汉城的天气常常是晴天，有时候多云。

在夏天，大典是很好的去处。大点的夏天的从六月到八月，气温从零下1度到26度。大典的天气常常是晴天，很热和多云。

去秋天，釜山是很好的去处。釜山的秋天是九月到十一月。气温从八度到二十九度，不冷和不热。釜山天气的常常多云。

去冬天，济州岛是很好的去处。济州岛的冬天是从十二月到二月。气温从4度到5度在右。济州岛的天气是常常多云，有的刮风和下大雪。很冷可是很美！

Technology of humans In the past, early humans could make tools and then they used spears and arrows. The tools were the first technology of human beings. Those technology was used by Homo Habilis, Homo Erectus, Homo sapiens, Australopithecus to hunt and fight. Technology were very important because it helped humans to hunt animals, fight with other humans and then when they won, they could get some weapons and clothes. This was development of humans. Today, humans have been developed with technology very much. Instead of spears or arrows, they use weapons like gunpowder or nuclear weapons. Today, humans have achieved while they competed and fought with each other living in other countries. But when today’s humans fight, many people die or become sick and competition and development will be doom. In the End, thanks to development of weapons, humans were able to become who they are now. If there were no weapons, humans could be staying in the past when we did hunt and fight each other with bare hands. Therefore, we can say that the development of weapons has influenced humans throughout history. https://www.thinglink.com/scene/1273882276513447939

Our design name is Cardboard Arcade Baseball. This was not too hard and not too easy, this was throw and put in the hole. I think grade4 student  likely our cardboard arcade. One person 10/10score! That 10/10 person is~  Sean!!!!  Our cardboard arcade’s good thing was quick decision because our original cardboard arcade was claw machine, but we didn’t finish claw machine and then we make new other cardboard arcade. We destroyed claw machine and then we made  quickly other new cardboard arcade because we used leftover cardboard arcade.  We enjoy claw machine but if we have more time we can finish our cardboard arcade. We mistake how many times we can finish cardboard arcade.

1.  Abject heat lamp to 35cm.

2. Set up logger pro and set time to 5 minutes.

3. Place temperature probe under material 1

4. Turn on heat lamp and press play on logger pro.

5. Measure and record the temperature every minute for 5minutes.

6. Repeat steps 1-5 with material 2 and material 3.

7. Repeat steps 1-6 more times for validity.

Our model is make more heat and this used foil, then protect heat, fur is heating more water, stick and lid are keep water’s fever don’t going out.